这个更新完了，就等明年看v7的表演了，提前祝大家2022年，新年快乐！
What's new in 7.2rc1 (2021-Dec-17 21:54):
*) arm64 - improved low disk space handling condition on upgrade;
*) backup - added "force-v6-to-v7-configuration-upgrade" option on backup load to clear RouterOS v7 configuration and trigger reimport of RouterOS v6 route configuration (CLI only);
*) backup - fixed automatic backup generation when resetting configuration;
*) bgp - do not export default BGP values;
*) bgp - improvements on detecting peers local address when IPv6 link-local addresses are used;
*) bluetooth - allow to export device, advertiser and scanner configuration;
*) capsman - improved system stability when processing CAP packet by Mangle;
*) certificate - allow to choose digest algorithm for CSR signing;
*) certificate - made "fingerprint" parameter read-only;
*) chr - improved system stability when writing into memory;
*) chr - temporarily suspended downgrade to RouterOS v6;
*) console - fixed "print" command with additional "where" condition;
*) console - made "password" parameter mandatory when creating a new user;
*) console - properly erase CLI history after configuration reset;
*) crs3xx - fixed CPU load balancing for ARM dual core devices;
*) dhcp-server - fixed DHCP Option decimal value parsing;
*) dhcp-server - fixed statistics sending in "Accounting Stop" packets;
*) dhcp-server - send "Class" attribute in "Accounting Request" when provided by RADIUS;
*) dhcpv4-server - allow adding comments;
*) dhcpv4-server - reset dynamic "bcast" flag when receiving offer from DHCP relay;
*) dhcpv4-server - reset offer counter when receiving offer from DHCP relay;
*) ethernet - improved system stability when receiving large packets on devices with 88F3720 CPU (nRAY, LHGG);
*) graphing - properly generate interface graph for traffic higher than 2.1Gbps;
*) hotspot - fixed login page over HTTPS;
*) ipsec - added hardware acceleration support for CCR2116;
*) l3hw - fixed HW offloaded routing when using 7 or more VLAN interfaces;
*) l3hw - fixed ICMP message when routed packet exceeds MTU and DF flag is set;
*) l3hw - fixed bonding source MAC address;
*) l3hw - improved system stability when using 7 or more VLAN interfaces;
*) lora - fixed "antenna-gain" parameter unit;
*) lte - added basic information support for Telit LM960 and LM940 in MBIM mode;
*) lte - expose diagnostics channel for all modems;
*) lte - fixed "monitor" command to not report old info;
*) lte - fixed packet forwarding on R11e-4G and R11e-LTE-US;
*) ntp - print log change time with time-zone applied;
*) ospf - fixed distance if "originate-default" is set to "always";
*) ospf - fixed neighbor stuck in ExStart;
*) ospf - fixed simple authentication;
*) ospf - improved logging;
*) ospf - improved overall stability;
*) ospf - improved stability for very large LSDB;
*) ospf - improved stability when DR goes down;
*) ospf - improves stability when handling looped back OSPF packets;
*) ovpn - added SHA2 authentication algorithm support;
*) ovpn - added hardware acceleration support for IPQ4018/IPQ4019 and AL* series chipsets;
*) ovpn - added option to send disconnect message in UDP mode;
*) ovpn - fixed large option message parsing;
*) poe - update PoE firmware only on devices that support it;
*) ppp - show local and remote IPv6 addresses (CLI only);
*) pppoe - added option to configure "host-uniq" parameter;
*) pppoe - added option to ignore PADI messages with empty service name;
*) pppoe - use default MTU of 1492;
*) pptp - added insecure connection warning;
*) queue - improved system stability when processing traffic;
*) route - fixed "min-prefix" configuration when set to 0;
*) route-filters - allow to filter and modify default route if "originate-default" is set to "always";
*) route-filters - fixed possible address list race condition and memory leak;
*) socks - fixed SOCKS5 support;
*) ssh - fixed forwarding with IPv6 link-local addresses;
*) ssl - fixed CA certificate processing when "subjAltName" is marked as critical;
*) supout - added "port-controller" bridge section;
*) tr069-client - accept 200-299 codes for HTTP diagnostics;
*) tr069-client - added support for wireless client uptime reporting;
*) upgrade - improved 404 error handling when checking for new versions;
*) upgrade - improved downgrade prompt message;
*) user - removed obsolete "tikapp" policy;
*) user - send "Class" attribute in "Accounting Request" when provided by RADIUS;
*) webfig - fixed default configuration popup presence;
*) webfig - fixed user policy lookup for skin designer;
*) wifiwave2 - added support for handling disconnect request messages from RADIUS servers;
*) wifiwave2 - fixed calling "scan" and "frequency-scan" commands through the API;
*) winbox - added "Mode" parameter under "Wireless" menu with WifiWave2 package;
*) winbox - added "TLS Version" parameter for "Interface/OVPN";
*) winbox - added "VRF" parameter for "SSH" and "Telnet" menus;
*) winbox - added interface list support for "IP/Traffic Flow" menu;
*) winbox - added local/remote CPU load parameters for "Bandwidth Test";
*) winbox - added support for "Tool/Speedtest" menu;
*) winbox - added support for W60G align tool;
*) winbox - changed "Accept Redirects" parameter type under "IPv6/Settings" menu;
*) winbox - do not require "name" and "file name" parameters for certificate import/export;
*) winbox - do not show connection tracking table if it has more than 10000 entries;
*) winbox - fixed "Switch" menu on Chateau devices;
*) winbox - fixed "expires-after" certificate parameter value;
*) winbox - fixed address list type parameters in "Routing" menu;
*) winbox - fixed error message when adding NTH rule with "0" value;
*) winbox - fixed minor typo under "LTE" interface menu;
*) winbox - made "9" the default value for "Target" parameter under "IP/Traffic Flow" menu;
*) winbox - made "Routing Filters/Rules" table sortable;
*) winbox - moved "IP/Route/Nexthops" and "IPv6/Route/Nexthops" menus to "Routing/Nexthops";
*) winbox - properly limit "Disconnect Timeout" value under "CAPsMAN/Configuration" menu;
*) winbox - properly update ethernet auto negotiation status on CHR;
*) winbox - renamed "Keep user configuration" to "Keep users" under "System/Reset Configuration" menu;
*) winbox - renamed "Revoked" parameter to "Revoked Time" under "System/Certificates" menu;
*) winbox - report local terminal session as "local" instead of "telnet";
*) winbox - require existing pool for "Address Pool" parameter under "IPv6/DHCP Server" menu;
*) winbox - require non empty "Packet Mark" value under "Queues" menu;
*) winbox - show "Lost Ratio" column by default under "Tools/Traffic Generator" menu;
*) winbox - show "Routes" column by default under "PPP/Secrets" menu;
*) winbox - show additional columns by default for "Wireless" menu with WifiWave2 package;
*) winbox - updated default "Routing/BGP/Peer Cache" table appearance;
*) winbox - use "total" as default value for "Tools/Profile";
*) wireguard - fixed IPv6 LL address generation;
*) wireguard - made "preshared-key" and "private-key" values sensitive;
*) wireless - added information about client signal strength to log messages about disconnections;
*) wireless - fixed frequency range information for IPQ4019 interfaces;
*) zerotier - properly handle IP address change;
分类：新闻中心
发布于 2021-12-21 21:33:01 +0800 CST
12月21日，MikroTik同时发布了v7.1.1和v7.2rc1两个版本，我预计圣诞前肯定会更新7.1.1，但没想到会放出7.2rc1，按照这个情况7.1作为stable版本，7.2rc作为Testing测试版本，那铁定v6.49.2是v6最后一个版本！在官网v7也被提到了RouterOS版本第一的位置，v6排到下面去了。MikroTik人也想在2021年对v7做一个了断！
这个更新完了，就等明年看v7的表演了，提前祝大家2022年，新年快乐！
What's new in 7.2rc1 (2021-Dec-17 21:54):
*) arm64 - improved low disk space handling condition on upgrade;
*) backup - added "force-v6-to-v7-configuration-upgrade" option on backup load to clear RouterOS v7 configuration and trigger reimport of RouterOS v6 route configuration (CLI only);
*) backup - fixed automatic backup generation when resetting configuration;
*) bgp - do not export default BGP values;
*) bgp - improvements on detecting peers local address when IPv6 link-local addresses are used;
*) bluetooth - allow to export device, advertiser and scanner configuration;
*) capsman - improved system stability when processing CAP packet by Mangle;
*) certificate - allow to choose digest algorithm for CSR signing;
*) certificate - made "fingerprint" parameter read-only;
*) chr - improved system stability when writing into memory;
*) chr - temporarily suspended downgrade to RouterOS v6;
*) console - fixed "print" command with additional "where" condition;
*) console - made "password" parameter mandatory when creating a new user;
*) console - properly erase CLI history after configuration reset;
*) crs3xx - fixed CPU load balancing for ARM dual core devices;
*) dhcp-server - fixed DHCP Option decimal value parsing;
*) dhcp-server - fixed statistics sending in "Accounting Stop" packets;
*) dhcp-server - send "Class" attribute in "Accounting Request" when provided by RADIUS;
*) dhcpv4-server - allow adding comments;
*) dhcpv4-server - reset dynamic "bcast" flag when receiving offer from DHCP relay;
*) dhcpv4-server - reset offer counter when receiving offer from DHCP relay;
*) ethernet - improved system stability when receiving large packets on devices with 88F3720 CPU (nRAY, LHGG);
*) graphing - properly generate interface graph for traffic higher than 2.1Gbps;
*) hotspot - fixed login page over HTTPS;
*) ipsec - added hardware acceleration support for CCR2116;
*) l3hw - fixed HW offloaded routing when using 7 or more VLAN interfaces;
*) l3hw - fixed ICMP message when routed packet exceeds MTU and DF flag is set;
*) l3hw - fixed bonding source MAC address;
*) l3hw - improved system stability when using 7 or more VLAN interfaces;
*) lora - fixed "antenna-gain" parameter unit;
*) lte - added basic information support for Telit LM960 and LM940 in MBIM mode;
*) lte - expose diagnostics channel for all modems;
*) lte - fixed "monitor" command to not report old info;
*) lte - fixed packet forwarding on R11e-4G and R11e-LTE-US;
*) ntp - print log change time with time-zone applied;
*) ospf - fixed distance if "originate-default" is set to "always";
*) ospf - fixed neighbor stuck in ExStart;
*) ospf - fixed simple authentication;
*) ospf - improved logging;
*) ospf - improved overall stability;
*) ospf - improved stability for very large LSDB;
*) ospf - improved stability when DR goes down;
*) ospf - improves stability when handling looped back OSPF packets;
*) ovpn - added SHA2 authentication algorithm support;
*) ovpn - added hardware acceleration support for IPQ4018/IPQ4019 and AL* series chipsets;
*) ovpn - added option to send disconnect message in UDP mode;
*) ovpn - fixed large option message parsing;
*) poe - update PoE firmware only on devices that support it;
*) ppp - show local and remote IPv6 addresses (CLI only);
*) pppoe - added option to configure "host-uniq" parameter;
*) pppoe - added option to ignore PADI messages with empty service name;
*) pppoe - use default MTU of 1492;
*) pptp - added insecure connection warning;
*) queue - improved system stability when processing traffic;
*) route - fixed "min-prefix" configuration when set to 0;
*) route-filters - allow to filter and modify default route if "originate-default" is set to "always";
*) route-filters - fixed possible address list race condition and memory leak;
*) socks - fixed SOCKS5 support;
*) ssh - fixed forwarding with IPv6 link-local addresses;
*) ssl - fixed CA certificate processing when "subjAltName" is marked as critical;
*) supout - added "port-controller" bridge section;
*) tr069-client - accept 200-299 codes for HTTP diagnostics;
*) tr069-client - added support for wireless client uptime reporting;
*) upgrade - improved 404 error handling when checking for new versions;
*) upgrade - improved downgrade prompt message;
*) user - removed obsolete "tikapp" policy;
*) user - send "Class" attribute in "Accounting Request" when provided by RADIUS;
*) webfig - fixed default configuration popup presence;
*) webfig - fixed user policy lookup for skin designer;
*) wifiwave2 - added support for handling disconnect request messages from RADIUS servers;
*) wifiwave2 - fixed calling "scan" and "frequency-scan" commands through the API;
*) winbox - added "Mode" parameter under "Wireless" menu with WifiWave2 package;
*) winbox - added "TLS Version" parameter for "Interface/OVPN";
*) winbox - added "VRF" parameter for "SSH" and "Telnet" menus;
*) winbox - added interface list support for "IP/Traffic Flow" menu;
*) winbox - added local/remote CPU load parameters for "Bandwidth Test";
*) winbox - added support for "Tool/Speedtest" menu;
*) winbox - added support for W60G align tool;
*) winbox - changed "Accept Redirects" parameter type under "IPv6/Settings" menu;
*) winbox - do not require "name" and "file name" parameters for certificate import/export;
*) winbox - do not show connection tracking table if it has more than 10000 entries;
*) winbox - fixed "Switch" menu on Chateau devices;
*) winbox - fixed "expires-after" certificate parameter value;
*) winbox - fixed address list type parameters in "Routing" menu;
*) winbox - fixed error message when adding NTH rule with "0" value;
*) winbox - fixed minor typo under "LTE" interface menu;
*) winbox - made "9" the default value for "Target" parameter under "IP/Traffic Flow" menu;
*) winbox - made "Routing Filters/Rules" table sortable;
*) winbox - moved "IP/Route/Nexthops" and "IPv6/Route/Nexthops" menus to "Routing/Nexthops";
*) winbox - properly limit "Disconnect Timeout" value under "CAPsMAN/Configuration" menu;
*) winbox - properly update ethernet auto negotiation status on CHR;
*) winbox - renamed "Keep user configuration" to "Keep users" under "System/Reset Configuration" menu;
*) winbox - renamed "Revoked" parameter to "Revoked Time" under "System/Certificates" menu;
*) winbox - report local terminal session as "local" instead of "telnet";
*) winbox - require existing pool for "Address Pool" parameter under "IPv6/DHCP Server" menu;
*) winbox - require non empty "Packet Mark" value under "Queues" menu;
*) winbox - show "Lost Ratio" column by default under "Tools/Traffic Generator" menu;
*) winbox - show "Routes" column by default under "PPP/Secrets" menu;
*) winbox - show additional columns by default for "Wireless" menu with WifiWave2 package;
*) winbox - updated default "Routing/BGP/Peer Cache" table appearance;
*) winbox - use "total" as default value for "Tools/Profile";
*) wireguard - fixed IPv6 LL address generation;
*) wireguard - made "preshared-key" and "private-key" values sensitive;
*) wireless - added information about client signal strength to log messages about disconnections;
*) wireless - fixed frequency range information for IPQ4019 interfaces;
*) zerotier - properly handle IP address change;
这个更新完了，就等明年看v7的表演了，提前祝大家2022年，新年快乐！
What's new in 7.2rc1 (2021-Dec-17 21:54):
*) arm64 - improved low disk space handling condition on upgrade;
*) backup - added "force-v6-to-v7-configuration-upgrade" option on backup load to clear RouterOS v7 configuration and trigger reimport of RouterOS v6 route configuration (CLI only);
*) backup - fixed automatic backup generation when resetting configuration;
*) bgp - do not export default BGP values;
*) bgp - improvements on detecting peers local address when IPv6 link-local addresses are used;
*) bluetooth - allow to export device, advertiser and scanner configuration;
*) capsman - improved system stability when processing CAP packet by Mangle;
*) certificate - allow to choose digest algorithm for CSR signing;
*) certificate - made "fingerprint" parameter read-only;
*) chr - improved system stability when writing into memory;
*) chr - temporarily suspended downgrade to RouterOS v6;
*) console - fixed "print" command with additional "where" condition;
*) console - made "password" parameter mandatory when creating a new user;
*) console - properly erase CLI history after configuration reset;
*) crs3xx - fixed CPU load balancing for ARM dual core devices;
*) dhcp-server - fixed DHCP Option decimal value parsing;
*) dhcp-server - fixed statistics sending in "Accounting Stop" packets;
*) dhcp-server - send "Class" attribute in "Accounting Request" when provided by RADIUS;
*) dhcpv4-server - allow adding comments;
*) dhcpv4-server - reset dynamic "bcast" flag when receiving offer from DHCP relay;
*) dhcpv4-server - reset offer counter when receiving offer from DHCP relay;
*) ethernet - improved system stability when receiving large packets on devices with 88F3720 CPU (nRAY, LHGG);
*) graphing - properly generate interface graph for traffic higher than 2.1Gbps;
*) hotspot - fixed login page over HTTPS;
*) ipsec - added hardware acceleration support for CCR2116;
*) l3hw - fixed HW offloaded routing when using 7 or more VLAN interfaces;
*) l3hw - fixed ICMP message when routed packet exceeds MTU and DF flag is set;
*) l3hw - fixed bonding source MAC address;
*) l3hw - improved system stability when using 7 or more VLAN interfaces;
*) lora - fixed "antenna-gain" parameter unit;
*) lte - added basic information support for Telit LM960 and LM940 in MBIM mode;
*) lte - expose diagnostics channel for all modems;
*) lte - fixed "monitor" command to not report old info;
*) lte - fixed packet forwarding on R11e-4G and R11e-LTE-US;
*) ntp - print log change time with time-zone applied;
*) ospf - fixed distance if "originate-default" is set to "always";
*) ospf - fixed neighbor stuck in ExStart;
*) ospf - fixed simple authentication;
*) ospf - improved logging;
*) ospf - improved overall stability;
*) ospf - improved stability for very large LSDB;
*) ospf - improved stability when DR goes down;
*) ospf - improves stability when handling looped back OSPF packets;
*) ovpn - added SHA2 authentication algorithm support;
*) ovpn - added hardware acceleration support for IPQ4018/IPQ4019 and AL* series chipsets;
*) ovpn - added option to send disconnect message in UDP mode;
*) ovpn - fixed large option message parsing;
*) poe - update PoE firmware only on devices that support it;
*) ppp - show local and remote IPv6 addresses (CLI only);
*) pppoe - added option to configure "host-uniq" parameter;
*) pppoe - added option to ignore PADI messages with empty service name;
*) pppoe - use default MTU of 1492;
*) pptp - added insecure connection warning;
*) queue - improved system stability when processing traffic;
*) route - fixed "min-prefix" configuration when set to 0;
*) route-filters - allow to filter and modify default route if "originate-default" is set to "always";
*) route-filters - fixed possible address list race condition and memory leak;
*) socks - fixed SOCKS5 support;
*) ssh - fixed forwarding with IPv6 link-local addresses;
*) ssl - fixed CA certificate processing when "subjAltName" is marked as critical;
*) supout - added "port-controller" bridge section;
*) tr069-client - accept 200-299 codes for HTTP diagnostics;
*) tr069-client - added support for wireless client uptime reporting;
*) upgrade - improved 404 error handling when checking for new versions;
*) upgrade - improved downgrade prompt message;
*) user - removed obsolete "tikapp" policy;
*) user - send "Class" attribute in "Accounting Request" when provided by RADIUS;
*) webfig - fixed default configuration popup presence;
*) webfig - fixed user policy lookup for skin designer;
*) wifiwave2 - added support for handling disconnect request messages from RADIUS servers;
*) wifiwave2 - fixed calling "scan" and "frequency-scan" commands through the API;
*) winbox - added "Mode" parameter under "Wireless" menu with WifiWave2 package;
*) winbox - added "TLS Version" parameter for "Interface/OVPN";
*) winbox - added "VRF" parameter for "SSH" and "Telnet" menus;
*) winbox - added interface list support for "IP/Traffic Flow" menu;
*) winbox - added local/remote CPU load parameters for "Bandwidth Test";
*) winbox - added support for "Tool/Speedtest" menu;
*) winbox - added support for W60G align tool;
*) winbox - changed "Accept Redirects" parameter type under "IPv6/Settings" menu;
*) winbox - do not require "name" and "file name" parameters for certificate import/export;
*) winbox - do not show connection tracking table if it has more than 10000 entries;
*) winbox - fixed "Switch" menu on Chateau devices;
*) winbox - fixed "expires-after" certificate parameter value;
*) winbox - fixed address list type parameters in "Routing" menu;
*) winbox - fixed error message when adding NTH rule with "0" value;
*) winbox - fixed minor typo under "LTE" interface menu;
*) winbox - made "9" the default value for "Target" parameter under "IP/Traffic Flow" menu;
*) winbox - made "Routing Filters/Rules" table sortable;
*) winbox - moved "IP/Route/Nexthops" and "IPv6/Route/Nexthops" menus to "Routing/Nexthops";
*) winbox - properly limit "Disconnect Timeout" value under "CAPsMAN/Configuration" menu;
*) winbox - properly update ethernet auto negotiation status on CHR;
*) winbox - renamed "Keep user configuration" to "Keep users" under "System/Reset Configuration" menu;
*) winbox - renamed "Revoked" parameter to "Revoked Time" under "System/Certificates" menu;
*) winbox - report local terminal session as "local" instead of "telnet";
*) winbox - require existing pool for "Address Pool" parameter under "IPv6/DHCP Server" menu;
*) winbox - require non empty "Packet Mark" value under "Queues" menu;
*) winbox - show "Lost Ratio" column by default under "Tools/Traffic Generator" menu;
*) winbox - show "Routes" column by default under "PPP/Secrets" menu;
*) winbox - show additional columns by default for "Wireless" menu with WifiWave2 package;
*) winbox - updated default "Routing/BGP/Peer Cache" table appearance;
*) winbox - use "total" as default value for "Tools/Profile";
*) wireguard - fixed IPv6 LL address generation;
*) wireguard - made "preshared-key" and "private-key" values sensitive;
*) wireless - added information about client signal strength to log messages about disconnections;
*) wireless - fixed frequency range information for IPQ4019 interfaces;
*) zerotier - properly handle IP address change;打赏支持
微信
支付宝
